Python中使用matplotlib绘制mqtt数据实时图像功能-巨人网络通讯

主页 > 知识库 > Python中使用matplotlib绘制mqtt数据实时图像功能

Python中使用matplotlib绘制mqtt数据实时图像功能

效果图

mqtt发布

本代码中publish是一个死循环，数据一直往外发送。

import random
import time
from paho.mqtt import client as mqtt_client
import json
from datetime import datetime

broker = 'broker.emqx.io'
port = 1883
topic = "/python/mqtt/li"
client_id = f'python-mqtt-{random.randint(0, 1000)}'  # 随机生成客户端id


def connect_mqtt():
    def on_connect(client, userdata, flags, rc):
        if rc == 0:
            print("Connected to MQTT Broker!")
        else:
            print("Failed to connect, return code %d\n", rc)

    client = mqtt_client.Client(client_id)
    client.on_connect = on_connect
    client.connect(broker, port)
    return client


def publish(client):
    while True:
        time.sleep(0.01)
        msg = json.dumps({"MAC": "0123456789",
                          "samplerate": 12,
                          "sampletime": str(datetime.utcnow().strftime('%Y/%m/%d-%H:%M:%S.%f')[:-3]),
                          "battery": 0.5,
                          "acc": [
                              [random.randint(200, 350), -random.randint(200, 350), -random.randint(200, 350), random.randint(200, 350), random.randint(200, 350), random.randint(200, 350)],
                              [random.randint(200, 350), -random.randint(200, 350), -random.randint(200, 350), random.randint(200, 350), random.randint(200, 350), random.randint(200, 350)],
                              [random.randint(200, 350), -random.randint(200, 350), -random.randint(200, 350), random.randint(200, 350), random.randint(200, 350), random.randint(200, 350)],
                              [random.randint(200, 350), -random.randint(200, 350), -random.randint(200, 350), random.randint(200, 350), random.randint(200, 350), random.randint(200, 350)],
                              [random.randint(200, 350), -random.randint(200, 350), -random.randint(200, 350), random.randint(200, 350), random.randint(200, 350), random.randint(200, 350)],
                              [random.randint(200, 350), -random.randint(200, 350), -random.randint(200, 350), random.randint(200, 350), random.randint(200, 350), random.randint(200, 350)],
                              [random.randint(200, 350), -random.randint(200, 350), -random.randint(200, 350), random.randint(200, 350), random.randint(200, 350), random.randint(200, 350)],
                              [random.randint(200, 350), -random.randint(200, 350), -random.randint(200, 350), random.randint(200, 350), random.randint(200, 350), random.randint(200, 350)],
                              [random.randint(200, 350), -random.randint(200, 350), -random.randint(200, 350), random.randint(200, 350), random.randint(200, 350), random.randint(200, 350)],
                              [random.randint(200, 350), -random.randint(200, 350), -random.randint(200, 350), random.randint(200, 350), random.randint(200, 350), random.randint(200, 350)],
                              [random.randint(200, 350), -random.randint(200, 350), -random.randint(200, 350), random.randint(200, 350), random.randint(200, 350), random.randint(200, 350)],
                              [random.randint(200, 350), -random.randint(200, 350), -random.randint(200, 350), random.randint(200, 350), random.randint(200, 350), random.randint(200, 350)],
                          ]})
        result = client.publish(topic, msg)
        status = result[0]
        if status == 0:
            print(f"Send `{msg}` to topic `{topic}`")
        else:
            print(f"Failed to send message to topic {topic}")


def run():
    client = connect_mqtt()
    client.loop_start()
    publish(client)


if __name__ == '__main__':
    run()

mqtt订阅

from paho.mqtt import client as mqtt_client
import time
import os

broker = 'broker.emqx.io'
port = 1883
topic = "/python/mqtt/li"

def connect_mqtt(client_id):
    """    MQTT 连接函数。    """
    def on_connect(client, userdata, flags, rc):
        """
        连接回调函数
        在客户端连接后被调用，在该函数中可以依据 rc 来判断客户端是否连接成功。
        """
        if rc == 0:
            print("Connected to MQTT Broker! return code %d" % rc)
        else:
            print("Failed to connect, return code %d\n", rc)

    client = mqtt_client.Client(client_id)
    # client.username_pw_set('uname', 'upwd')  # 链接mqtt所需的用户名和密码，没有可不写
    client.on_connect = on_connect
    client.connect(broker , port)
    return client


def subscribe(client: mqtt_client, a_topic):
    """     订阅消息       """
    def on_message(client, userdata, msg):
        """
        消息回调函数
        在客户端从 MQTT Broker 收到消息后被调用，在该函数中我们将打印出订阅的 topic 名称以及接收到的消息内容。
         * 这里可添加自定义数据处理程序
        """
        print('From topic : %s\n\tmsg : %s' % (msg.topic, msg.payload.decode()))

    client.subscribe(topic)
    client.on_message = on_message


def run(client_id, topic):
    client = connect_mqtt(client_id)
    subscribe(client, topic)
    client.loop_forever()

if __name__ == '__main__':
    run('test_eartag-003-python-li', 'zk100/gw/#')

matplotlib绘制动态图

import matplotlib.pyplot as plt
import numpy as np

count = 100  # 图中最多数据量

ax = list(range(count))  # 保存图1数据
ay = [0] * 100
bx = list(range(count))  # 保存图2数据
by = [0] * 100
num = count  # 计数

plt.ion()  # 开启一个画图的窗口进入交互模式，用于实时更新数据
plt.rcParams['figure.figsize'] = (10, 10)  # 图像显示大小
plt.rcParams['font.sans-serif'] = ['SimHei']  # 防止中文标签乱码，还有通过导入字体文件的方法
plt.rcParams['axes.unicode_minus'] = False
plt.rcParams['lines.linewidth'] = 0.5  # 设置曲线线条宽度
plt.tight_layout()
while True:
    plt.clf()  # 清除刷新前的图表，防止数据量过大消耗内存
    plt.suptitle("总标题", fontsize=30)  # 添加总标题，并设置文字大小
    g1 = np.random.random()  # 生成随机数画图
    # 图表1
    ax.append(num)  # 追加x坐标值
    ay.append(g1)  # 追加y坐标值
    agraphic = plt.subplot(2, 1, 1)
    agraphic.set_title('子图表标题1')  # 添加子标题
    agraphic.set_xlabel('x轴', fontsize=10)  # 添加轴标签
    agraphic.set_ylabel('y轴', fontsize=20)
    plt.plot(ax[-count:], ay[-count:], 'g-')  # 等于agraghic.plot(ax,ay,'g-')
    # 图表2
    bx.append(num)
    by.append(g1)
    bgraghic = plt.subplot(2, 1, 2)
    bgraghic.set_title('子图表标题2')
    bgraghic.plot(bx[-count:], by[-count:], 'r^')

    plt.pause(0.001)  # 设置暂停时间，太快图表无法正常显示
    num = num + 1

matplotlib绘制mqtt数据实时图像

单线程

先启动mqtt订阅服务
mqtt订阅中有阻塞，更新数据后因订阅服务没有结束，导致绘图程序无法绘图
先启动绘图程序
绘图程序本身也是个循环，拿不到mqtt的实时数据，图像无法更新

两个服务加入协程，也不行。具体原因还不知道，容后补充。
mqtt作为线程启动，可解决上述问题

import json
import random
from paho.mqtt import client as mqtt_client
import time
import datetime
from math import ceil, floor
import matplotlib.pyplot as plt
import _thread

# 公共变量
broker = 'broker.emqx.io'
topic = "/python/mqtt/li"
port = 1883
client_id = f'python-mqtt-li-{random.randint(0, 100)}'

show_num = 300

x_num = [-1]  # 计数
acc1 = []
acc2 = []
acc3 = []
acc4 = []
acc5 = []
acc6 = []
stime = []


"""mqtt subscribe topic"""
def str_microsecond_datetime2int_13timestamp(str_microsecond_datetime):
    """将字符串型【毫秒级】格式化时间 转为 【13位】整型时间戳"""
    datetime_obj = datetime.datetime.strptime(str_microsecond_datetime, "%Y/%m/%d-%H:%M:%S.%f")
    obj_stamp = int(time.mktime(datetime_obj.timetuple()) * 1000.0 + datetime_obj.microsecond / 1000.0) / 1000.0
    return obj_stamp


def int2datetime(int_float_timestamp):
    """
    有小数点：分离小数点，整数转为格式化时间，小数点直接跟在后面
    无小数点：从第10位进行分离，
    所以本函数只适用于时间戳整数位数大于9且小于11.
    """
    if '.' in str(int_float_timestamp):
        int_float = str(int_float_timestamp).split('.')
        date = time.localtime(int(int_float[0]))
        tempDate = time.strftime("%Y/%m/%d-%H:%M:%S", date)
        secondafter = '.' + str(int_float[1])
        return str(tempDate) + secondafter


def parse_mqttmsg(msg):
    """解析mqt头数据   MAC samplerate sampletime battery acc"""
    content = json.loads(msg.payload.decode())
    span = 1000 / content['samplerate'] * 10
    time_span = [ceil(span) / 10 / 1000, floor(span) / 10 / 1000]
    sampletime = content['sampletime']
    sampletime_int = str_microsecond_datetime2int_13timestamp(sampletime)
    acc = content['acc']
    for i in range(len(acc)):
        x_num.append(x_num[-1] + 1)
        acc1.append(acc[i][0])
        acc2.append(acc[i][1])
        acc3.append(acc[i][2])
        acc4.append(acc[i][3])
        acc5.append(acc[i][4])
        acc6.append(acc[i][5])
        if i != 0:
            sampletime_int += time_span[i % 2]
            stime.append(int2datetime(round(sampletime_int * 1000, 0) / 1000))
        else:
            stime.append(sampletime)
        print(x_num[-1], stime[-1], acc1[-1], acc2[-1], acc3[-1], acc4[-1], acc5[-1], acc6[-1])


def connect_mqtt():
    def on_connect(client, userdata, flags, rc):
        if rc == 0:
            print("Connected to MQTT Broker!")
        else:
            print("Failed to connect, return code %d\n", rc)
            pass

    client = mqtt_client.Client(client_id)
    client.on_connect = on_connect
    client.connect(broker, port)
    return client


def subscribe(client: mqtt_client):
    def on_message(client, userdata, msg):
        # print(f"Received `{msg.payload.decode()}` from `{msg.topic}` topic")
        parse_mqttmsg(msg)

    client.subscribe(topic)
    client.on_message = on_message


def run():
    client = connect_mqtt()
    subscribe(client)
    client.loop_forever()


""" draw figures """
def draw_figure():
    plt.ion()  # 开启一个画图的窗口进入交互模式，用于实时更新数据
    plt.rcParams['figure.figsize'] = (10, 10)  # 图像显示大小
    plt.rcParams['font.sans-serif'] = ['SimHei']  # 防止中文标签乱码，还有通过导入字体文件的方法
    plt.rcParams['axes.unicode_minus'] = False
    plt.rcParams['lines.linewidth'] = 0.5  # 设置曲线线条宽度


    count = 0
    while True:
        plt.clf()  # 清除刷新前的图表，防止数据量过大消耗内存
        plt.suptitle("总标题", fontsize=30)  # 添加总标题，并设置文字大小
        plt.tight_layout()

        # 图表1
        agraphic = plt.subplot(2, 1, 1)
        agraphic.set_title('子图表标题1')  # 添加子标题
        agraphic.set_xlabel('x轴', fontsize=10)  # 添加轴标签
        agraphic.set_ylabel('y轴', fontsize=20)
        plt.plot(x_num[1:][-show_num:], acc1[-show_num:], 'g-')
        try:
            xtricks = list(range(len(acc1) - show_num, len(acc1), 10))  # **1**
            xlabels = [stime[i] for i in xtricks]  # **2**
            plt.xticks(xtricks, xlabels, rotation=15)
        except:
            pass

        # 图表2
        bgraghic = plt.subplot(2, 1, 2)
        bgraghic.set_title('子图表标题2')
        bgraghic.set_xlabel('x轴', fontsize=10)  # 添加轴标签
        bgraghic.set_ylabel('y轴', fontsize=20)
        bgraghic.plot(x_num[1:][-show_num:], acc2[-show_num:], 'r^')

        plt.pause(0.001)  # 设置暂停时间，太快图表无法正常显示
        count = count + 1


if __name__ == '__main__':
    # 多线程
    _thread.start_new_thread(run, ())
    draw_figure()

到此这篇关于Python中使用matplotlib绘制mqtt数据实时图像的文章就介绍到这了,更多相关matplotlib绘制mqtt数据实时图像内容请搜索脚本之家以前的文章或继续浏览下面的相关文章希望大家以后多多支持脚本之家！

您可能感兴趣的文章: