Go中http超时问题的排查及解决方法

n := 1000
var waitGroutp = sync.WaitGroup{}
waitGroutp.Add(n)
for i := 0; i  n; i++ {
 go func(x int) {
  httpSDK.Request()
 }
}
waitGroutp.Wait()

func createHttpClient(host string, tlsArg *TLSConfig) (*http.Client, error) {
 httpClient := http.Client{
 Timeout: time.Second,
 }
 tlsConfig := tls.Config{InsecureSkipVerify: true}
 transport := http.Transport{
 TLSClientConfig: tlsConfig,
 MaxIdleConnsPerHost: 20,
 }
 http2.ConfigureTransport(transport)
 return httpClient, nil
}
// 使用httpClient
httpClient.Do(req)

func (c *Client) do(req *Request) (retres *Response, reterr error) {
 if resp, didTimeout, err = c.send(req, deadline); err != nil {
 }
}

func send(ireq *Request, rt RoundTripper, deadline time.Time) (resp *Response, didTimeout func() bool, err error) {
 rt.RoundTrip(req) 
}

var n int
// roundTrip implements a RoundTripper over HTTP.
func (t *Transport) roundTrip(req *Request) (*Response, error) {
 // 检查是否有注册http2，有的话直接使用http2的RoundTrip
 if t.useRegisteredProtocol(req) {
 altProto, _ := t.altProto.Load().(map[string]RoundTripper)
 if altRT := altProto[scheme]; altRT != nil {
  resp, err := altRT.RoundTrip(req)
  if err != ErrSkipAltProtocol {
  return resp, err
  }
 }
 }
 for {
 //n++
 // start := time.Now()
 pconn, err := t.getConn(treq, cm)
  // log.Println("getConn time", time.Now().Sub(start), x)
 if err != nil {
  t.setReqCanceler(req, nil)
  req.closeBody()
  return nil, err
 }
 }
}

func (t *Transport) getConn(treq *transportRequest, cm connectMethod) (*persistConn, error) {
 if pc, idleSince := t.getIdleConn(cm); pc != nil {
 }
 //n++
 go func(x int) {
 // start := time.Now()
 // defer func(x int) {
 // log.Println("getConn dialConn time", time.Now().Sub(start), x)
 // }(n)
 pc, err := t.dialConn(ctx, cm)
 dialc - dialRes{pc, err}
 }(n)
}

func configureTransport(t1 *http.Transport) (*Transport, error) {
 // 声明一个连接池
 // noDialClientConnPool 这里很关键，指明连接不需要dial出来的，而是由http1连接升级而来的 
 connPool := new(clientConnPool)
 t2 := Transport{
 ConnPool: noDialClientConnPool{connPool},
 t1: t1,
 }
 connPool.t = t2
// 把http2的RoundTripp的方法注册到，http1上transport的altProto变量上。
// 当请求使用http1的roundTrip方法时，检查altProto是否有注册的http2，有的话，则使用
// 前面代码的useRegisteredProtocol就是检测方法
 if err := registerHTTPSProtocol(t1, noDialH2RoundTripper{t2}); err != nil  {
 return nil, err
 }
 // http1.1 升级到http2的后的回调函数，会把连接通过 addConnIfNeeded 函数把连接添加到http2的连接池中
 upgradeFn := func(authority string, c *tls.Conn) http.RoundTripper {
 addr := authorityAddr("https", authority)
 if used, err := connPool.addConnIfNeeded(addr, t2, c); err != nil {
  go c.Close()
  return erringRoundTripper{err}
 } else if !used {
  go c.Close()
 }
 return t2
 }
 if m := t1.TLSNextProto; len(m) == 0 {
 t1.TLSNextProto = map[string]func(string, *tls.Conn) http.RoundTripper{
  "h2": upgradeFn,
 }
 } else {
 m["h2"] = upgradeFn
 }
 return t2, nil
}

func (t *Transport) dialConn(ctx context.Context, cm connectMethod) (*persistConn, error) {
 pconn := persistConn{
 t:  t,
 }
 if cm.scheme() == "https"  t.DialTLS != nil {
 // 没有自定义DialTLS方法，不会走到这一步
 } else {
 conn, err := t.dial(ctx, "tcp", cm.addr())
 if err != nil {
  return nil, wrapErr(err)
 }
 pconn.conn = conn
 if cm.scheme() == "https" {
  // addTLS 里进行 tls 握手，也是建立新连接最耗时的地方。
  if err = pconn.addTLS(firstTLSHost, trace); err != nil {
  return nil, wrapErr(err)
  }
 }
 }
 if s := pconn.tlsState; s != nil  s.NegotiatedProtocolIsMutual  s.NegotiatedProtocol != "" {
 if next, ok := t.TLSNextProto[s.NegotiatedProtocol]; ok {
  // next 调用注册的升级函数
  return persistConn{t: t, cacheKey: pconn.cacheKey, alt: next(cm.targetAddr, pconn.conn.(*tls.Conn))}, nil
 }
 }
 return pconn, nil
}

sdk.Request() // 先请求一次，建立好连接，测试是否一直复用连接。
time.Sleep(time.Second)
n := 1000
var waitGroutp = sync.WaitGroup{}
waitGroutp.Add(n)
for i := 0; i  n; i++ {
 go func(x int) {
  sdk.Request()
 }
}
waitGroutp.Wait()

httpClient.Transport = http2.Transport{
  TLSClientConfig: tlsConfig,
}

func (c *addConnCall) run(t *Transport, key string, tc *tls.Conn) {
 cc, err := t.NewClientConn(tc)
}

func (t *Transport) newClientConn(c net.Conn, singleUse bool) (*ClientConn, error) {
 // log.Println("http2.newClientConn")
}

func (p *clientConnPool) getClientConn(req *http.Request, addr string, dialOnMiss bool) (*ClientConn, error) {
 p.mu.Lock()
 for _, cc := range p.conns[addr] {
 if st := cc.idleState(); st.canTakeNewRequest {
  if p.shouldTraceGetConn(st) {
  traceGetConn(req, addr)
  }
  p.mu.Unlock()
  return cc, nil
 }
 }
 if !dialOnMiss {
 p.mu.Unlock()
 return nil, ErrNoCachedConn
 }
 traceGetConn(req, addr)
 call := p.getStartDialLocked(addr)
 p.mu.Unlock()
 }

func (cc *ClientConn) idleStateLocked() (st clientConnIdleState) {
 if cc.singleUse  cc.nextStreamID > 1 {
 return
 }
 var maxConcurrentOkay bool
 if cc.t.StrictMaxConcurrentStreams {
 maxConcurrentOkay = true
 } else {
 maxConcurrentOkay = int64(len(cc.streams)+1)  int64(cc.maxConcurrentStreams)
 }
 st.canTakeNewRequest = cc.goAway == nil  !cc.closed  !cc.closing  maxConcurrentOkay 
 int64(cc.nextStreamID)+2*int64(cc.pendingRequests)  math.MaxInt32
 // if st.canTakeNewRequest == false {
 // log.Println("clientConnPool", cc.maxConcurrentStreams, cc.goAway == nil, !cc.closed, !cc.closing, maxConcurrentOkay, int64(cc.nextStreamID)+2*int64(cc.pendingRequests)  math.MaxInt32)
 // }
 st.freshConn = cc.nextStreamID == 1  st.canTakeNewRequest
 return
}

func (rl *clientConnReadLoop) processSettings(f *SettingsFrame) error {
 case SettingMaxConcurrentStreams:
  cc.maxConcurrentStreams = s.Val
  //log.Println("maxConcurrentStreams", s.Val)
}

// Server is an HTTP/2 server.
type http2Server struct {
 // MaxConcurrentStreams optionally specifies the number of
 // concurrent streams that each client may have open at a
 // time. This is unrelated to the number of http.Handler goroutines
 // which may be active globally, which is MaxHandlers.
 // If zero, MaxConcurrentStreams defaults to at least 100, per
 // the HTTP/2 spec's recommendations.
 MaxConcurrentStreams uint32
} 

httpClient.Transport = http2.Transport{
  TLSClientConfig: tlsConfig,
}