系统环境准备
开发组件与依赖库安装
安装centos时选择Server with GUI，右面的可以不勾选，后面统一来装
配置本地yum源
以上包如果缺乏可配置本地yum源进行安装
sudo mount /dev/cdrom /mnt/
[galen@localhost yum.repos.d]$ sudo vim /etc/yum.repos.d/cdrom.repo
[galen@localhost yum.repos.d]$ cat cdrom.repo
[c7-media]
name=isofile
baseurl=file:///mnt
enable=1
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
[galen@localhost yum.repos.d]$ sudo mv CentOS-Base.repo CentOS-Base.repo-bak
[galen@localhost yum.repos.d]$ sudo mv CentOS-Media.repo CentOS-Media.repo-bak
[galen@localhost yum.repos.d]$ sudo mv cdrom.repo CentOS-Media.repo
配置好yum源后开始安装依赖库，如下
yum install glibc glibc-devel glibc-headers ksh libaio libaio-devel libgcc libstdc++ libstdc++-devel make sysstat unixODBC unixODBC-devel pdksh compat-libcap1 compat-libstdc++ elfutils-libelf-devel gcc-c++
关闭防火墙
[galen@localhost ~]$ systemctl stop firewalld.service
[galen@localhost ~]$ systemctl disable firewalld.service
Removed symlink /etc/systemd/system/multi-user.target.wants/firewalld.service.
Removed symlink /etc/systemd/system/dbus-org.fedoraproject.FirewallD1.service.
关闭selinux
编辑/etc/sysconfig/selinux文件，保存退出后执行 setenforce 0命令
vim /etc/sysconfig/selinux
SELINUX=disabled
#SELINUXTYPE=targeted #注释掉
创建oracle用户、修改系统参数
创oracle建用户和组
[root@localhost galen]# groupadd oinstall
[root@localhost galen]# groupadd dba
[root@localhost galen]# useradd -g oinstall -G dba oracle
[root@localhost galen]# passwd oracle
[root@localhost galen]# id oracle
uid=1001(oracle) gid=1001(oinstall) groups=1001(oinstall),1002(dba)
系统参数设置
官方推荐值：
fs.aio-max-nr = 1048576
fs.file-max = 6815744
kernel.shmall = 2097152
kernel.shmmax = 536870912 #推荐超过一半的物理内存
kernel.shmmni = 4096
kernel.sem = 250 32000 100 128
net.ipv4.ip_local_port_range = 9000 65500
net.core.rmem_default = 262144
net.core.rmem_max = 4194304
net.core.wmem_default = 262144
net.core.wmem_max = 1048576
通过 /sbin/sysctl -a |grep xxx 查看系统各参数，如果大于官方推荐值不修改，如果小于官方推荐值则修改为官方推荐值，写入/etc/sysctl.conf文件中，使用sysctl -p使其生效，示例如下
[root@localhost etc]# cat sysctl.conf
fs.aio-max-nr = 6815744
kernel.sem = 250 32000 100 128
net.ipv4.ip_local_port_range = 9000 65500
net.core.rmem_default = 262144
net.core.rmem_max = 4194304
net.core.wmem_default = 262144
net.core.wmem_max = 1048576
修改资源限制如下
[root@localhost etc]# vim /etc/security/limits.conf
oracle soft nproc 2048
oracle hard nproc 16384
oracle soft nofile 1024
oracle hard nofile 65536
oracle soft stack 10240
添加以下内容到/etc/pam.d/login
[root@localhost ~]# vim /etc/pam.d/login
session required pam_limits.so
添加以下内容到/etc/profile
[root@localhost ~]# vim /etc/profile
if [[ $USER = "oracle" ]]; then
if [[ $SHELL = "/bin/ksh" ]]; then
ulimit -p 16384
ulimit -n 65536
else
ulimit -u 16384 -n 65536
fi
fi
保存后执行source /etc/profile生效
配置oracle用户环境变量，在/home/oracle/.bash_profile中加入如下内容
[root@localhost ~]# vim /home/oracle/.bash_profile
export ORACLE_BASE=/u01/app/oracle
export ORACLE_HOME=$ORACLE_BASE/product/11.2.0/db_1
export ORACLE_SID=orcl
export PATH=$ORACLE_HOME/bin:$ORACLE_HOME/OPatch:$ORACLE_HOME/jdk/bin:$PATH
export LANG="en_US.UTF-8"
export NLS_LANG=american_AMERICA.UTF8
export NLS_DATE_FORMAT="YYYY-MM-DD HH24:MI:SS"
创建oracle安装目录
mkdir -p /u01/app/oracle/product/11.2.0/db_1
chown -R oracle:oinstall /u01/app
chmod -R 775 /u01/app
安装oracle 11g
挂载oracle11g安装包iso（也可以通过其他方式将oracle安装包传到主机），将安装文件复制到oracle home目录下，修改文件权限给oracle用户
[root@localhost /]# mkdir /mnt/oracle11g
[root@localhost /]# mount /dev/cdrom /mnt/oracle11g/
[root@localhost /]# cp -r /mnt/oracle11g /home/oracle/
# 复制到oracle home目录下并修改权限
[root@localhost oracle]# chown -R oracle:oinstall /home/oracle/oracle11g/
[root@localhost oracle]# chmod -R 775 /home/oracle/oracle11g/
接下来使用oracle用户登录桌面
执行./runInstaller开始安装，Centos 7安装的时候错误弹框有时候会变成一条竖线，安装无法进行下去，所以运行时执行
./runInstaller -jreLoc /etc/alternatives/jre_1.8.0
每项操作如下
[Configure Security Updates] 取消勾选 I wish to receive security updates via My Oracle Support，Next
[Installation Option] Install database software only，Next
[Grid Options] Next
[Product Languages] Next
[Enterprise Edition] Next
[Installation Location] Next
[Create Inventory] Next
[Operating System Groups] Next
[Prerequisite Checks] Next
[Summary] Finish，开始安装oracle 11g
安装到84%的时候可能会出现ins_ctx.mk相关的错误，如下
修改/u01/app/oracle/product/11.2.0/db_1/ctx/lib/ins_ctx.mk文件
# 源文件
ctxhx: $(CTXHXOBJ)
$(LINK_CTXHX) $(CTXHXOBJ) $(INSO_LINK)
# 修改为
ctxhx: $(CTXHXOBJ)
-static $(LINK_CTXHX) $(CTXHXOBJ) $(INSO_LINK) /usr/lib64/stdc.a
修改/u01/app/oracle/product/11.2.0/db_1/sysman/lib/ins_emagent.mk文件
# 源文件
$(SYSMANBIN)emdctl:
$(MK_EMAGENT_NMECTL)
# 修改为
$(SYSMANBIN)emdctl:
$(MK_EMAGENT_NMECTL) -lnnz11
retry继续安装到94%时，弹出
使用root用户ssh到主机到上述目录分别执行orainstRoot.sh与root.sh，执行root.sh时根据提示填入路径
/u01/app/oracle/product/11.2.0/dbhome_1/bin，执行完成后到UI点击OK，安装完成
环境配置脚本
- 使用root用户登录
- 确保系统iso驱动器已连接（/dev/cdrom可mount）
- 复制脚本到主机并给予可执行权限，执行脚本完成后即可开始安装oracle 11g
oracle 11g环境配置脚本
#!/bin/bash
# 配置yum源为本地iso
function set_yum_media() {
cd /etc/yum.repos.d/
for repo_file in `ls /etc/yum.repos.d/ | grep -v Media`
do
new_file=$repo_file.bak
mv $repo_file $new_file
done
mkdir -p /mnt/media-dir
mount /dev/cdrom /mnt/media-dir
sed -i -e 's/baseurl=file:\/\/\/.*/baseurl=file:\/\/\/mnt\/media-dir\//g' -e 's/enabled=0/enabled=1/g' `ls /etc/yum.repos.d/ | grep Media`
cd -
rm -rf /var/run/yum.pid
yum -y update
}
function install_packages() {
for package in glibc glibc-devel glibc-headers ksh libaio libaio-devel libgcc libstdc++ libstdc++-devel make sysstat unixODBC unixODBC-devel pdksh compat-libcap1 compat-libstdc++ elfutils-libelf-devel gcc-c++
do
yum -y install $package
done
}
function create_oracle_user() {
groupadd oinstall
groupadd dba
useradd -g oinstall -G dba oracle
# 设置oracle用户密码为oracle
echo oracle|passwd --stdin oracle
}
function set_system_parm() {
sed -i '$a\fs.aio-max-nr = 1048576' /etc/sysctl.conf
sed -i '$a\fs.file-max = 6815744' /etc/sysctl.conf
sed -i '$a\kernel.shmall = 2097152' /etc/sysctl.conf
sed -i '$a\kernel.shmmax = 536870912' /etc/sysctl.conf
sed -i '$a\kernel.shmmni = 4096' /etc/sysctl.conf
sed -i '$a\kernel.sem = 250 32000 100 128' /etc/sysctl.conf
sed -i '$a\net.ipv4.ip_local_port_range = 9000 65500' /etc/sysctl.conf
sed -i '$a\net.core.rmem_default = 262144' /etc/sysctl.conf
sed -i '$a\net.core.rmem_max = 4194304' /etc/sysctl.conf
sed -i '$a\net.core.wmem_default = 262144' /etc/sysctl.conf
sed -i '$a\net.core.wmem_max = 1048586' /etc/sysctl.conf
sysctl -p
}
function set_system_limit_parm() {
sed -i '$a\oracle soft nproc 2048' /etc/security/limits.conf
sed -i '$a\oracle hard nproc 16384' /etc/security/limits.conf
sed -i '$a\oracle soft nofile 1024' /etc/security/limits.conf
sed -i '$a\oracle hard nofile 65536' /etc/security/limits.conf
sed -i '$a\oracle soft stack 10240' /etc/security/limits.conf
}
function set_profile_parm() {
sed -i '$a\session required pam_limits.so' /etc/pam.d/login
sed -i '$a\if [[ $USER = "oracle" ]]; then' /etc/profile
sed -i '$a\ if [[ $SHELL = "/bin/ksh" ]]; then' /etc/profile
sed -i '$a\ ulimit -p 16384' /etc/profile
sed -i '$a\ ulimit -n 65536' /etc/profile
sed -i '$a\ else' /etc/profile
sed -i '$a\ ulimit -u 16384 -n 65536' /etc/profile
sed -i '$a\ fi' /etc/profile
sed -i '$a\fi' /etc/profile
source /etc/profile
}
function set_oracle_env() {
sed -i '$a\export ORACLE_BASE=/u01/app/oracle' /home/oracle/.bash_profile
sed -i '$a\export ORACLE_HOME=$ORACLE_BASE/product/11.2.0/db_1' /home/oracle/.bash_profile
sed -i '$a\export ORACLE_SID=orcl' /home/oracle/.bash_profile
sed -i '$a\export PATH=$ORACLE_HOME/bin:$ORACLE_HOME/OPatch:$ORACLE_HOME/jdk/bin:$PATH' /home/oracle/.bash_profile
sed -i '$a\export LANG="en_US.UTF-8"' /home/oracle/.bash_profile
sed -i '$a\export NLS_LANG=american_AMERICA.UTF8' /home/oracle/.bash_profile
sed -i '$a\export NLS_DATE_FORMAT="YYYY-MM-DD HH24:MI:SS"' /home/oracle/.bash_profile
source /home/oracle/.bash_profile
}
function create_oracle_dir() {
mkdir -p /u01/app/oracle/product/11.2.0/db_1
chown -R oracle:oinstall /u01/app
chmod -R 775 /u01/app
}
function disable_firewall() {
systemctl stop firewalld.service
systemctl disable firewalld.service
sed -i "s/SELINUX=enforcing/SELINUX=disabled/g" /etc/sysconfig/selinux
setenforce 0
}
if [ `whoami` == "root" ]
then
set_yum_media
install_packages
create_oracle_user
echo "set system parm"
set_system_parm
echo "set limits"
set_system_limit_parm
echo "set /etc/profile"
set_profile_parm
echo "set oracle env"
set_oracle_env
echo "create oracle dir"
create_oracle_dir
echo "disable firwall"
disable_firewall
fi
到此这篇关于Centos下Oracle11gR2安装教程与自动化配置脚本的方法的文章就介绍到这了,更多相关Oracle11gR2安装与自动化配置内容请搜索脚本之家以前的文章或继续浏览下面的相关文章希望大家以后多多支持脚本之家！
您可能感兴趣的文章:- centos7下安装oracle11gR2的详细步骤
- linux系统下oracle11gR2静默安装的经验分享
- Oracle11g r2 卸载干净重装的详细教程(亲测有效已重装过)
- oracle11gR2使用exp导出命令时报EXP-00011错误的解决方法
- Oracle11g R2 安装教程完整版
