到终端里进行配置。在终端里输入adsl-setup [root@localhost root]# adsl-setup Welcome to the ADSL client setup. First, I will run some checks on system to make sure the PPPoE client is installed properly… LOGIN NAME Enter your Login Name (default root): (username) ‘此处输入ADSL的用户名。 INTERFACE Enter the Ethernet interface connected to the ADSL modem For Solaris, this is likely to be something like /dev/hme0. For Linux, it will be ethX, where ‘X’ is a number. (default eth0): ‘直接用默认的eth0就行了。 Do you want the link to come up on demand, or stay up continuously? If you want it to come up on demand, enter the idle time in seconds after which the link should be dropped. If you want the link to stay up permanently, enter ‘no’ (two letters, lower-case.) NOTE: Demand-activated links do not interact well with dynamic IP addresses. You may have some problems with demand-activated links. Enter the demand value (default no): ‘输默认的NO DNS Please enter the IP address of your ISP’s primary DNS server. If your ISP claims that ‘the server will provide dynamic DNS addresses’, enter ‘server’ (all lower-case) here. ’DNS地址，南京地区的主DNS为218.2.135.1，辅DNS为61.147.37.1其它地区可参照当地ISP If you just press enter, I will assume you know what you are doing and not modify your DNS setup. Enter the DNS information here: server PASSWORD ‘输入ADSL密码，默认为自己的电话号码 Please enter your Password: ’再次输入密码 Please re-enter your Password: USERCTRL Please enter ‘yes’ (two letters, lower-case.) if you want to allow normal user to start or stop DSL connection (default yes): y ‘是否允许普通用户开启或关闭ADSL连接，默认允许。 FIREWALLING Please choose the firewall rules to use. Note that these rules are very basic. You are strongly encouraged to use a more sophisticated firewall setup; however, these will provide basic security. If you are running any servers on your machine, you must choose ‘NONE’ and set up firewalling yourself. Otherwise, the firewall rules will deny access to all standard servers like Web, e-mail, ftp, etc. If you are using SSH, the rules will block outgoing SSH connections which allocate a privileged source port. ’选择防火墙的等级，0到2，按需要选。 The firewall choices are: 0 - NONE: This script will not set any firewall rules. You are responsible for ensuring the security of your machine. You are STRONGLY recommended to use some kind of firewall rules. 1 - STANDALONE: Appropriate for a basic stand-alone web-surfing workstation 2 - MASQUERADE: Appropriate for a machine acting as an Internet gateway for a LAN Choose a type of firewall (0-2): 0 Start this connection at boot time Do you want to start this connection at boot time? ‘是否在启动时自动连接？ Please enter no or yes (default no):y ** Summary of what you entered ** ’以下是ADSL账号设置信息 Ethernet Interface: eth0 User name: nj007.cn Activate-on-demand: No DNS addresses: Supplied by ISP’s server Firewalling: NONE User Control: y Accept these settings and adjust configuration files (y/n)? y ‘以上信息正确吗，Y保存，N重填。 Adjusting /etc/sysconfig/network-scripts/ifcfg-ppp0 Adjusting /etc/ppp/chap-secrets and /etc/ppp/pap-secrets (But first backing it up to /etc/ppp/chap-secrets.bak) (But first backing it up to /etc/ppp/pap-secrets.bak) Congratulations, it should be all set up! Type ‘/sbin/ifup ppp0′ to bring up your xDSL link and ‘/sbin/ifdown ppp0′ to bring it down. Type ‘/sbin/adsl-status /etc/sysconfig/network-scripts/ifcfg-ppp0′ to see the link status.
已经完成配置ADSL宽带连接，接下来，重启LINUX即可。命令reboot或者shutdown -r now
